Controls And Connectors - TC Electronic CLARITY M Quick Start Manual

18 CLARITY M/CLARITY M STEREO
CLARITY M/CLARITY M STEREO Controls and Connectors
(2) (3)
(1)
(6) (8)
(10)
(11)
(12)
(13) (14)
(4)
(9)
(5)
(7)
(15)

Controls and Connectors

(1) Radar loudness meter showing (7) These selection buttons access
short-term loudness history, the corresponding functions
momentary loudness and listed in the LCD display.
program loudness. Holding the far right button
turns the unit on and off.
(2) Detailed statistics overview
for all key loudness (8) The current source is displayed
measuring parameters on the front page. In plug-in
mode, the track name and
(3) State-of-the-art true peak
number where the plug-in is
meter identifies clipping
inserted will be indicated here.
in DACs, CODECs and
downstream filters. (9) High-accuracy real time
analyzer with 1/3 octave
(4) Downmix compliance meters
resolution and pr. band zoom.
based on TC ELECTRONIC's
industry-standard loudness (10) Holes for mounting brackets
measurement algorithms. such as RAM-mount
(not included).
(5) Left-Right or Left-Right/
LS-RS Correlation Meter. This (11) Kensington lock.
displays the phase relationship
(12) Power connection.
of a stereo signal, where
(13) Connector for included
the far right (+1) position
breakout cable with 6 channels
indicates perfect phase, the
AES inputs (stereo version has
center (0) position shows the
2 AES channels).
widest acceptable divergence,
(14) USB connection for plug-in
and measurements below 0
metering, preset exchange and
indicate out-of-phase material.
firmware updates.
(6) Adjustment knob allows
(15) Stereo optical input.
various parameters to
be controlled.
Quick Start Guide 19