Part 2: Machine Assembly - Automated Signature Technology Ghostwriter Manual

Automated Signature Technology

Part 2: Machine Assembly

Standard Machine Components
1. Paper Feeder
2. Ghostwriter signature machine
3. Light board with illuminated signing area
4. Paper Control Tray
5. Writing arms
6. Sheaffer fountain pen
7. Foot pedal
8. Power cord
9. Signature Card (purchased separately)
Additional Options
The following options are available for purchase. Please call for pricing.
» Electric lock
» Dust cover
» Writing arms for large pens
» Signature transfer kit
Assembly of the Machine
1. Open the top of the box
2. Remove the machine wrapping in packing materials and
set on a table or desk.
3. Remove the packing material.
4. Plug the foot pedal into the back of the machine.
5. Make sure the light table is plugged into the back of the machine.
6. Plug the small jack of the power cord into the back of the machine and the other end into the
power supply. Then plug the cord from the power supply into the a power outlet.
7. Locate paper control tray. It screws into the light board. This tray is needed for auto-feed
operation.
8, Locate the paper catch tray. It slides into the front of the machine. It catches the paper after it is
www.signaturemachine.com
7
1
2
3
4
5
6
7
8
9
800.636.4450