Cisco ASR 9010 Unpacking And Installing page 10

Unpacking the Cisco ASR 9910 Router
Unpacking the Cisco ASR 9910 Router
Follow these steps to unpack the Cisco ASR 9910 Router from its shipping container.
Procedure
Step 1 Cut the straps that secure the cardboard shipping container to the pallet.
Step 2
Remove the cardboard shipping container.
Step 3 Remove the packaging material (see the figure below).
a) Remove the foam packaging material from the top of the router.
b) Remove all screws that secure the two brackets to the router chassis. Save these screws used to hold the
bracket to the chassis to use later to attach the ground strap.
Step 4
Remove two bolts per hold-down bracket that secure the brackets to the pallet.
Unpacking and Installing the Chassis
10
Unpacking and Installing the Chassis