Viconics Micro-stat H200 Series Quick Start Manual

DESCRIPTION
The H200 series low voltage, microcomputer-based PI
(proportional and integral) humidistats are designed for
accurate humidification and/or dehumidification control
in non-corrosive commercial applications such as:
hospitals, schools, office buildings, retail stores,
museums, computer rooms, etc.
The H200 series is available with one or two outputs
for maximum flexibility. Outputs can be of the following
type: proportional, on/off, and pulse width modulation
(PWM). In addition, a wide variety of mounting
configurations is available.
remote duct and room as well as integral room and
duct.
Setpoint adjustment can be either concealed or
exposed, adding even more versatility to the product.
Exposed models feature internally selectable minimum
and maximum setpoint knob stops.
In order to facilitate periodic recalibration, the H200
series contains a unique autocal key, which permits
instant recalibration (see dimension drawing on page 5
for location).
Features
• Microcomputer-based design with PI algorithm
• One or two outputs
• On/off and/or proportional outputs
• Direct or reverse acting outputs
• Integrated and remote sensing
• Autocal button
• Concealed or exposed set point
• Ouput signal to digital indicating devices
• Optional H263 diagnostic tool with digital display
• Sensor failure protection
• CE approved
04/06/04 LIT-H200X-E02 H200.doc
ELECTRONIC HUMIDISTAT: H200
• ONE OR TWO STAGES
Sensing options include
Each humidistat is computer calibrated and factory
programmed with default parameters. All control
parameters (such as proportional band, stage
differential, etc.) may be changed in the field with the
H263 programming tool without having to remove the
thermostat cover. The H263 also doubles as a
diagnostic tool and indicates the status of all the inputs
and outputs, and will reduce troubleshooting time by
quickly identifying the specific problem.
Fig.1: Wall mounted humidistat
Benefits
⇒
Exceptional accuracy
⇒
Controls humidification and dehumidification equipment
⇒
Greater flexibility
⇒
Controls humidification and dehumidification equipment
⇒
Larger choice of mounting options
⇒
Permits instant recalibration
⇒
Can be used in a large variety of environments
⇒
Increases functionality of product
⇒
Simplifies troubleshooting
⇒
Prevent water dammage
⇒
Can be sold in European markets
1