Table of Contents
Advertisement
SMOKE DETECTOR
7
SAFETY CONDITIONS
7.1 Repairs and maintenance
Any maintenance works or periodic inspection shall be carried out by skilled personnel employed by
companies being authorized or trained by manufacturer. Any repairs must be carried out by the
manufacturer. Manufacturer do not carry responsibility for the operation of any device being serviced and
repaired by unauthorized personnel.
Works at height
7.2
Any detector installation works carried out at height must be carried out with particular care and using
tools and machinery in good working condition. Special attention shall be paid to the stability of ladders,
platforms, etc. Any electric tool shall be used strictly obeying the safety rules specified in the
manufacturer's instruction manuals.
Anti-dusting eye protection
7.3
It is obligatory to use protective anti-dusting glasses and masks during detector installation works that
produce high amount of dust, such as hole drilling for detector base mounting on ceilings/walls.
7.4 Eye protection against laser beam operating equipment
During the alignment of the detector optical path with the reflector/set of reflectors using a laser viewfinder,
special eye protection against direct laser exposure (3R class laser equipment) must be provided.
8
STORAGE AND TRANSPORT
The detectors should be stored in closed premises at ambient temperature ranging from 0
relative humidity up to 80% at +35
vapors. The detectors should not be exposed to direct sun; heating devices should not directly influence the
detectors or their packing.
The detectors transportation should be carried out in transport packing using any transport means and
obeying the transport recommendations given on the packages and securing protection against possibility of
mechanical damage and impact of temperatures lower than –40
humidity higher than 95%.
Doc:UM-D-BM100-0717-EN
o
C, free from volatile sulphur compounds as well as acid and alkaline
DEKON D-BM100 OPTICAL BEAM
o
C and higher than +70
o
o
C to +40
C and
o
C and relative
Page 8/16
Advertisement
Table of Contents
