Symbols For Notices And Warnings; Display For Help, Notices And Warnings - Weinmann & Schanz ACC30 Manual

SYMBOLS FOR NOTICES AND WARNINGS

Symbol

DISPLAY FOR HELP, NOTICES AND WARNINGS

By pressing the button
which the following icons are available.
Short manual
Short manual for use of the controller.
Controller version
Overview of controller type and software version.
Notifications
Log of exceeded maximum temperatures and activated protection functions.
By pressing the buttons
Press
Warnings
Log of sensors, pump or flow meter failures.
By pressing the buttons
Press
Delete warning and notification logs
By pressing the button
that are not connected will be deleted from the list of failures.
Note: Failures of sensors that are required for controller operation can not
be deleted.
10 English
Description
Notifications
In case of exceeding the maximum temperature or activation of pro-
tection function, the controller indicates the event with flashing symbol
on the display. If the maximum temperature is no longer exceeded or
if the protection function is turned off, a lited symbol indicates a recent
event.
Press to open the screen to check notifications.
Warning
In the event of sensor failure, the controller indicates the failure with
flashing symbol on the display. If the issue is resolved or no longer
present, a lited symbol indicates a recent event.
Press to open the screen to check warnings.
the screen for help, messages and warnings will be oppened in
to exit the list.
to exit the list.
and move through the list of notifications.
and move through the list of warnings.
will erase notification and warning log. All sensors