Savwinch CS Series Installation, Operation & Maintenance Manual page 9

Model 4000SSS
Unit Weight 101lb/46kg
Maximum Anchor Weight 88lb/40kg
Maximum Chain Length 98ft/30m
Circuit Breaker 120A
Minimum Cable Size 3 B&S
You must use the following cable sizes as a minimum (for standard 12V Winches):
It is suggested that you use the recommended cable sizes to ensure minimum voltage loss. Savwinch drum
winches can operate with up to a 9% voltage loss without affecting performance significantly, though you will
encounter slightly slower drop and retrieval speeds. Note that if using the Electronic Fast Fall System a voltage
loss of no more than 6% is acceptable; any less and the Electronic Fast Fall System will not function.
450CS/SS & 880CS/SS Winch :
*For up to 4.5m of cable, use 6B&S and experience 4% voltage drop
*For up to 9m of cable, use 4B&S and experience 5% voltage drop
*For up to 12m of cable, use 3B&S and experience 4% voltage drop
1000CS/SS/SSS & 1500CS/SS/SSS Winch :
*For up to 4.5m of cable, use 6B&S and experience 6% voltage drop
*For up to 9m of cable, use 4B&S and experience 8% voltage drop
*For up to 12m of cable, use 3B&S and experience 6% voltage drop
2000SS/SSS Winch :
*For up to 4.5m of cable, use 6B&S and experience 8% voltage drop
*For up to 9m of cable, use 4B&S and experience 9% voltage drop
*For up to 12m of cable, use 3B&S and experience 8% voltage drop
3000SSS & 4000SSS Winch :
*For up to 4.5m of cable, use 4B&S and experience 6% voltage drop
*For up to 9m of cable, use 3B&S and experience 8% voltage drop
*For up to 13.5m of cable, use 2B&S and experience 9% voltage drop
9