Sharp SH1810C User Manual page 91

To Set the Focus Mode
→
"Organiser" "Tools 3" tab
Barcode"
1. Press [Options] and select "Focus".
2. Select "Auto Focus", "Macro" or "Manual Focus".
To Use the Continuous Scanning
→
"Organiser" "Tools 3" tab
Barcode"
1. In scanning mode, press [Options] and select "Continuous
Scan".
2. Select "On" or "Off".
To Set the Mobile Light
→
"Organiser" "Tools 3" tab
Barcode"
1. Press [Options] and select "Mobile Light".
2. Select "On" or "Off".
To Adjust the Exposure
→
"Organiser" "Tools 3" tab
Barcode"
1. Press [Options] and select "Exposure".
2. Select the desired exposure.
→ →
"Scanner" "Scan
→ →
"Scanner" "Scan
→ →
"Scanner" "Scan
→ →
"Scanner" "Scan
Scanning Business Cards
→
"Organiser" "Tools 3" tab
1. Frame the business card in the centre of the screen using
the camera and press [Read].
To cancel scanning, press [Back] or U.
2. Press [Scan] or B.
The scanned results are displayed.
3. Press [Assign].
The scanned data is saved to Phonebook.
When the number of characters that can be scanned is
exceeded, select "Yes".
To paste the scanned data to a message, press [Options] and
select "Send Message".
To save the scanned data as a Notepad entry, press [Options]
and select "Save to Notepad".
To copy the scanned data, press [Options] and select "Copy".
To specify the destination of the scanned data, press [Options]
and select "Save to", and then select the desired destination.
To attach the scanned image to a Phonebook entry, press
[Options] and select "Add Image", and then select "On".
Note
• Only Simplified Chinese and alphanumerical characters can be
scanned.
→ →
"Scanner" "Scan Card"
Organiser 91