Advertisement
Electrical Connections
Perform electrical connections according to the following connector scheme:
M1 P&T MAIN CONNECTOR
PAN RIGHT
PAN LEFT
TILT UP
TILT DOWN
0V POT
+V POT
POT. REF. PAN
POT. REF. TILT
NON CONNECTED
Electrical installation practices
Always use color-coded or numbered conductors for wiring and identification ease at a later date.
–
Tighten the cable glands up to a 8 Nm torque ratio.
–
Keep this manual in a safe place for later use and reference.
–
1
2
3
4
5
6
7
8
9
10
Incorrect Power Supply Voltage may damage the unit.
5/7
Advertisement
