Advertisement
The unit can be mounted on its appropriate
SSBK250 bracket using four M8x1,25 holes
arranged on Ø101,6 mm and placed on the
bottom plate of the unit. Otherwise, arrange
consequently the plane where the unit is
meant to be mounted and make sure that it is
solid and it can adequately support the
weight of the unit and of the camera housing
(including the camera and lens).
Fix the enclosed side bracket to the unit using three
M6x16 screws. The side bracket has two Ø6,5 holes
that can be used to fix a 129 Series housing.
A side bracket for 168 and 204 housings is available.
129 SERIES SIDE BRACKET DIMENSIONS
SSBK250 BRACKET
BOTTOM PLATE
SIDE BRACKET
4/7
Advertisement
