Whirlpool LE9200XW Use And Care Manual page 5

1. Select a cycle by turning the Cycle
Control Knob either way. Stop when
the indicator on the knob's outer ring
points to the cycle and/or setting you
want. See pages 6-7 for further cycle
information.
2. Press a temperature selection
which matches the type of fabric
being dried. The red indicator will
appear over the temperature selec-
tion you have chosen.
3. Push the Start Button to start
the dryer.
4. To stop and restart the dryer:
l
Open the door or turn the Cycle Con-
lrol Knob to OFF to stop the dryer.
l
Close the door, select a cycle (if nec-
essary) and push the Start Button to
restart the dryer.
The Cycle Control Knob should point
to an OFF area when the dryer is not in
use. If the dryer is stopped before the
cycle is finished, turn the Cycle Control
Knob to an OFF area.
5