Drying Tips; Tumble Press" Setting; Finish Guard" Setting; Electronic Dry-Miser - Whirlpool LE7800XS Use & Care Manual

Drying tips
The dryer does not heat when the
Temperature Selector is set on FLUFF
AIR. This setting can be used to fluff
bedding, plastic tablecloths, foam
rubber pillows, stuffed toys, sneakers,
etc.
1.
Turn the Control Knob to the number
of minutes you want in FLUFF AIR.
2. Push the START Button.
FINISH GUARD" Setting
When you are unable to unload the
dryer as soon as it stops, wrinkles can
form.
If you don't open the door within
5 minutes afterthe dryer stops, FINISH
GUARD takes over
automatically
to
protect the load.
You don't have to set
the Control Knob for FINISH GUARD.
FINISH GUARD tumbles the load
for a few seconds without heat, every
5 minutes for up to 40 minutes. This
tumbling rearranges and fluffs the load
to help avoid the wrinkles that set in
when the load remains in the warm
dryer.
TUMBLE PRESS" Setting
The TUMBLE PRESS setting removes
wrinkles from dry clothing such as
items that may have been packed
in a suitcase, closet, or items not
removed from the dryer.
1.
Set Control Knob to TUMBLE PRESS.
2. Set Temperature Selector to PERM'T
PRESVMED.
3. Push START Button.
The load will tumble in heated air
for 15 minutes. The heat shuts off and
the dryer continues to tumble the load
for 5 more minutes.
For best results, TUMBLE PRESS only a
few items at a time. Put them on hang-
ers or fold them as soon as the dryer
stops.
Electronic DRY-MISER'"
Control
An electronic sensor determines
the amount of moisture in the
clothes and automatically shuts off
when the proper dryness is reached.
Gentle Heat
The dryer automatically reduces
the heat settings in HEAVY HIGH and
PERMIT PRESS MED cycles. During
the last few minutes of each of
these cycles me dryer temperature
gradually reduces to a lower heat
setting. This helps prevent
overdrying.