Table of Contents
Advertisement
Lint screen
Clean
the lint screen
before
each
load.
A screen blocked by lint can
increase drying time and may be a FIRE HAZARD.
Open the lid and pull the lint screen
straiaht out
ROLL
the lint off the screen with
your fingers.
DO NOT
rinse or wash the screen.
Push the screen firmly back into place. I
Lint removal
Lint can gather inside the dryer and create a
FIRE HAZARD. This lint
should
be removed
at least every 2 to 3 years, or more often, depending
on dryer usage.
I
I
Igniter
Lower
Access
-
,#.I
ELECTRIC
DRYERS
GAS DRYERS
I
Cleaning should be done only by a qualified
person.
1.
Remove back panel (electric)
or lower access panel (gas).
2. Avoid damaging
wires,
thermostats, funnel or igniter.
3. Remove lint from shaded area -
see art-with
a soft brush or
vacuum cleaner.
4. Replace panel; reconnect and
re-level dryer.
0
Advertisement
Table of Contents
