Table of Contents
Advertisement
Caring For Your Dryer
Product and Fabric Damage Hazard
Do not run the dryer with the lint screen loose, damaged, blocked or
missing. Doing so can cause overheating and damage to both the
dryer and fabrics.
Cleaning the lint screen
The lint screen is located under a lid on top of
the dryer. Clean it before each load. A
screen blocked by lint can increase drying
time.
1. Open the lid and pull the lint screen straight
out.
2. Roll lint off the screen with your fingers. Do
not rinse or wash the screen to remove lint.
Wet lint is hard to remove.
3. Push the lint screen firmly back into place
and dose the lid.
Lint screen maintenance
Laundry detergents and fabric softeners can
cause a residue build-up on the lint screen. A
clogged lint screen can extend drying times.
Clean the lint screen every six months or more
frequently if it becomes clogged due to a
residue build-up. Use the following method:
1. Wet both sides of lint screen with hot water.
2. Wet a nylon brush with hot water and liquid
detergent.
3. Scrub lint screen with the brush until all
residue build-up is removed.
4. Rinse with hot water.
5Thoroughiy
dry lint screen with a clean
towel and replace in dryer.
9
Advertisement
Table of Contents
