Whirlpool LE6150XS Use And Care Manual page 5

1. Select a cycle by turning the Cycle Control
Knob either way. Stop when the indicator
on the knob's outer ring points to the cycle
and setting you want. See pages 6-7 for
further cycle information.
2. Push the Start Button to start
the dryer.
To stop and restart the dryer
l
Open the door or turn the Cyde Control
Knob to OFF to stop the dryer.
l
Close the door, select a cycle (if necessary)
and push the Start Button to restart the
dryer.
To change the cycle and/or time, turn the
Cycle Control Knob either way to point to a
new setting.
The Cycle Control Knob should point to an
OFF area when the dryer is not in use. If the
dryer is stopped before the cycle is finished,
turn the Cycle Control Knob to an OFF area.