Page 1
ESTIL ANUFACTURING 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-1339 www.vestilmfg.com Assembly Instructions: TH‐95‐XX‐FL Trash Can With Foot Pedal Lid Lifter Item No. Part No. Description QTY 1 30‐016‐026 Bracket, Lid Lifter 1 2 36102 Nut, Hex nut Z plated, ¼ ‐ 20 2 3 30‐001‐172‐A Final Assembly W/O Shipping ...
Page 2
NOTE: Numbers in parentheses refer to item numbers in the table on p1. STEP 1 Attach Weldment (11) Align axle holes in weldment with axle channel (refer to exploded diagram on front page) in the base of the trash bin Insert axle through weldment holes and axle channel STEP 2 Attach wheels to ends of the axle Axle receiver Press wheels onto the ends of the axle until they latch onto the axle. (Pins inside the axle receiver of each wheel hold onto grooves milled into the axle.) 14 STEP 3: Attach foot lever (10) to axle bracket 10 weldment Fasten foot pedal shims (7) to the weldment using nuts (8) & bolts (9) as shown in the 9 diagram to the right. Do not tighten theses connections yet. 7 Insert foot lever (10) around trash bin, then insert the ends of the pedal under the shims & between the bolts. STEP 4: Connect lid lifting weldment (6) to axle bracket ...