Firmware Ver; Firmware Update - Hobby King ORX TX10i Instruction Manual

System settings

Firmware Ver.

This function shows information about the transmitter 's currently installed firmware version.

Firmware update

The function is for updating the system's firmware.
Setup:
1. Download the latest firmware from
2. Open the firmware update on a computer and connect the system via USB cable.
3. Select [Firmware Update] from the systems function menu. Press the wheel, the system will
show a prompt, "This will enter firmware update mode and halt other functions" with an option to
continue. Press Roller button and the screen will show "Yes" and "No". Select "Yes" and press
Roller button to confirm.
*When in update mode the system will show a prompt, "Update mode active. Turn the system off
and on again to exit".
4. Once the system has been recognized by the computer select the update button.
*Once the system has been updated it will restart.
*Once the system has restarted it is safe to remove the USB cable.
RF module ver.
This function shows information about the receiver's currently installed RF module version.
.. •••••••••7x1a=
� '"""'
ID CHANNEL TRANSMITTER
�
I
DICITALPRDPDRTIDNALPRDCRAMMABLE
"-' .,. � �J RADIDCDNTADLSYSTEM
=Firmware ver. =
ORX Tx10i
1.0 15-Jan-2018
Hardware lJ_1.5
www.hobbyking.com
=Firmware update=
This wi 11 enter
firmware update
mode and halt
other functions
Press "OK" to
confirm
=
=RF module ver.
18-Apr-2018
23
•--=:: �
�I
��®