Subscribe to Our Youtube Channel
Related Manuals for AXIOMTEK MPC102-845
Summary of Contents for AXIOMTEK MPC102-845
- Page 1 MPC102-845 All-in-One 10.4” XGA TFT Fanless Medical Touch PanelComputer with Intel® Onboard Celeron® Processor N3060 User’s Manual...
-
Page 2: Disclaimers
Axiomtek does not make any commitment to update the information in this manual. Axiomtek reserves the right to change or revise this document and/or product at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Axiomtek Co., Ltd. -
Page 3: Safety Precautions
Most electronic components are sensitive to static electrical charge. Disconnect the power cords from the MPC102-845 Series before making any installation. Be sure both the system and the external devices are turned OFF. Sudden surge of power could ruin sensitive components. Make sure the MPC102-845 Series is properly grounded. -
Page 4: Table Of Contents
Table of Contents Disclaimers ..................... ii Safety Precautions ..................iii Chapter 1 Introduction ..........1 General Description ................1 Specifications ..................2 Dimensions ..................4 I/O Outlets .................... 6 Packing List ..................7 Chapter 2 Hardware and Installation ...... 9 SBC87845 Jumpers and Connectors.......... - Page 5 Chapter 4 Drivers Installation ......47 System ....................47 4.1.1 Win 7 ......................47 4.1.2 Win 8/8.x ....................48 Touch Screen ..................48 4.2.1 Specification ....................48 4.2.2 Driver Installation- Windows 7/8.x ............. 49 Embedded O.S................... 51 4.3.1 WES 7 & WE8S ..................51...
- Page 6 This page is intentionally left blank.
-
Page 7: Chapter 1 Introduction
10.4” TFT LCD display and low power consumption Intel Celeron® N3060 processor(2M Cache, up to 2.48 GHz). The MPC102-845 supports Windows 7, Windows 8.x , Windows 10 and Windows embedded OS. The panel computer is able to install a mSATA card and provide two Mini card slot for wireless module. -
Page 8: Specifications
Expansion Two PCIe Mini card Storage One mSATA One 2.5” SATA HDD Power connector MPC102-845-DC: 9VDC to 36VDC with phoenix power connector MPC102-845-J: External 65W Medical AC Adapter with screw type connector Introduction... - Page 9 — Power Output: 12VDC, Max. 5.42A — NOTE All specifications and images are subject to change without notice. NOTE The DC power source to be used with MPC102-845 must be galvanically isolated according to IEC60601-1 safety of medical devices! Introduction...
-
Page 10: Dimensions
MPC102-845 User’s Manual Dimensions This diagram shows you dimensions and outlines of the MPC102-845. Introduction... - Page 11 MPC102-845 User’s Manual Introduction...
-
Page 12: I/O Outlets
MPC102-845 User’s Manual I/O Outlets Please refer to the following illustration for I/O locations of the MPC102-845. Function Function POWER SWITCH (ATX) COM 2(RS-232) Power Input connector (Phoenix) Dual USB 3.0 ports Power Input connector (Screw) Ethernet (RJ-45) Dual USB 2.0 ports... -
Page 13: Packing List
Screws for HDD x4 Wall mount bracket (optional) Phoenix connector x 1 (for MPC102-845-DC) Power Adapter & power cord (for MPC102-845-J) If you can not find the package or any items are missing, please contact Axiomtek distributors immediately. Introduction... - Page 14 MPC102-845 User’s Manual This page is intentionally left blank. Introduction...
-
Page 15: Hardware And Installation
MPC102-845 User’s Manual Chapter 2 Hardware and Installation The MPC102-845 provides rich I/O ports and flexible expansions for you to meet different demands, The chapter will show you how to install the hardware. It includes: SBC87845 Jumpers and Connectors ... -
Page 16: Sbc87845 Jumpers And Connectors
MPC102-845 User’s Manual SBC87845 Jumpers and Connectors Component Side Hardware and Installation... - Page 17 MPC102-845 User’s Manual Solder Side Hardware and Installation...
-
Page 18: Jumper Settings
MPC102-845 User’s Manual 2.1.1 Jumper Settings Making the proper jumper settings configure the SBC87845 to match the needs of your application. The following table shows the default jumper settings for the onboard devices. ★ Default Setting Jumper Jumper Setting ★ OSD function: LCD ON/OFF... -
Page 19: Connectors
MPC102-845 User’s Manual 2.1.2 Connectors The connectors allow the CPU Board to connect with other parts of the system. Ensure that all connectors are in place and firmly attached. The following table lists the function of each connector on the SBC87845... - Page 20 MPC102-845 User’s Manual LVDS connector: CN2 Pin Assignment Description Description LVDSA_DATAN0 LVDSB_DATAN2 LVDSA_DATAP0 LVDSB_DATAP2 Resolution selection[0] Resolution selection[1] LVDSA_DATAN1 LVDSA_DATAN3 LVDSB_DATAN3 LVDSA_DATAP1 LVDSB_DATAN0 LVDSA_DATAP3 LVDSB_DATAP3 LVDSB_DATAP0 LVDSA_DATAN2 LVDSA_CLKN LVDSB_CLKN LVDSA_DATAP2 LVDSB_DATAN1 LVDSA_CLKP LVDSB_CLKP Resolution selection[2] LVDSB_DATAP1 Resolution selection[3] Hardware and Installation...
- Page 21 MPC102-845 User’s Manual HDD power connector: CN6 Description +12V Full-size PCI-Express Mini Card: CN7 This is a full-size PCI-Express Mini Card connector on the top side complying with PCI-Express Mini Card Spec. V1.2. It supports either PCI-Express or USB 2.0.
- Page 22 MPC102-845 User’s Manual SIM card connector: CN8 Description Description UIM PWR UIM RST UIM VPP UIM CLK UIM DATA DIO connector: CN9 Description GPIO0 GPIO1 GPIO2 GPIO3 GPIO4 GPIO5 GPIO6 +3.3V GPIO7 Hardware and Installation...
- Page 23 MPC102-845 User’s Manual Power connector: CN10 Pin Description DCIN (+12V) DCIN (+12V) Full-size PCI-Express Mini Card and mSATA Connector: CN11 This is a full-size PCI-Express Mini Card connector on the top side complying with PCI-Express Mini Card Spec. V1.2. It supports either PCI-Express, USB 2.0 or SATA (mSATA).
- Page 24 MPC102-845 User’s Manual TOUCH connector: CN13 Pin Description Sense Lin/Mic In connector: CN16 Pin Description Description LIN IN R LIN IN L MIC IN Speaker connector: CN17 Pin Description SPKOUT_L- SPKOUT_L+ SPKOUT_R- SPKOUT_R+ System Fan connector: CN18 Pin Description +12V / Speed control output...
- Page 25 MPC102-845 User’s Manual USB2.0 connector: CN19 Pin Description Pin Description USB- USB- USB+ USB+ +5V Standby Power connector: CN28, CN29 Pin Description Pin Description +5V_SBY COM port Connector The pin assignment of RS-232/RS-422/RS-485 is listed on the following table. RS-232...
-
Page 26: Ethernet
MPC102-845 User’s Manual Ethernet The GOT5100T-845 is equipped with two high performance Plug and Play Ethernet interfaces, full compliant with IEEE 802.3 standard, and can be connected with a RJ-45 LAN connector. Please refer to detailed pin assignment list below:... -
Page 27: Mountings - Wall/Desktop/Vesa
MPC102-845 User’s Manual Mountings – Wall/Desktop/VESA There are several mounting ways for the MPC102-845, Panel, Wall, Desktop and VESA mountings. 2.3.1 Wall-Mounting The MPC102-845 is designed for Wall mounting application. Please refer to the following steps: Fix wall mount bracket on the back of the unit. - Page 28 MPC102-845 User’s Manual Step 2 Assemble the desktop stand to the chassis, and fix the screws. ： CAUTION Use recommended/suitable mounting apparatus to avoid risk of injury. Hardware and Installation...
-
Page 29: Vesa-Arm Mounting
MPC102-845 User’s Manual 2.3.3 VESA-ARM Mounting Step 1 Find out the screws as marked on the back side of chassis. Step 2 Assemble the VESA-ARM to the back side of the chassis, and fix the screws. Step 3 VESA mounting Installation completed. -
Page 30: Hdd Installation
MPC102-845 User’s Manual HDD Installation The MPC102-845 provides a convenient Hard Disk Drive (HDD) bracket for users to install 2.5” SATA HDD. Please follow the steps: Step 1 Unscrew eight screws to open the back cover. Step 2 Find out the HDD slot in back cover. - Page 31 MPC102-845 User’s Manual Step 3 Unscrew the thumbscrew. ： CAUTION When the HDD thickness is less than 9.5mm, please add HDD sponges. Step 4 Insert the 2.5” SATA HDD to the connector. Hardware and Installation...
-
Page 32: Dram Installation
Step 5 Screw the thumbscrew. Installation completed. DRAM Installation The MPC102-845 provides one 204-pin DDR3L SODIMM socket that support system memory up to 8GB. Please follow steps below to install the memory modules: Step 1 Open the back cover and find out the DIMM socket on main board(SBC87845). - Page 33 MPC102-845 User’s Manual Step 2 Insert the DRAM to the DIMM socket, and then push it down firmly until it is clipped by the socket. Step 3 Install the memory module into the socket and push it firmly down until it is fully seated.
-
Page 34: Mini Cards Card Installation
Mini cards Card Installation 2.6.1 Wireless LAN Card Installation The MPC102-845 provides two Mini card slots for user to install wireless LAN cards. You can choose either slot 1 or slot 2 to install the wireless LAN card and refer to the following... - Page 35 MPC102-845 User’s Manual Step 3 Find the built-in Antenna cable. There are two connectors on wireless LAN card. One is MAIN, and the other is secondary. Connect antenna cable to MAIN connector on wireless LAN card. Hardware and Installation...
-
Page 36: Msata Card Installation
MPC102-845 User’s Manual 2.6.2 mSATA Card Installation The MPC102-845 provides one Mini card slot for user to install mSATA. Please choose the slot 2 when installing the mSATA card and refer to the following instructions and illustration: Step 1 Open the back cover and find out the mini-card slot on main board. -
Page 37: Power Input (Phoenix Type)
+: Power positive NOTE: The safety ground must be connected to ensure the unit working appropriately. NOTE: The DC power source to be used with MPC102-845 must be galvanically isolated according to IEC60601-1 safety of medical devices! Hardware and Installation... - Page 38 MPC102-845 User’s Manual This page is intentionally left blank. Hardware and Installation...
-
Page 39: Chapter 3 Ami Bios Setup Utility
MPC102-845 User’s Manual Chapter 3 AMI BIOS Setup Utility This chapter provides users with detailed description how to set up basic system configuration through the AMIBIOS8 BIOS setup utility. Navigation Keys The BIOS setup/utility uses a key-based navigation system called hot keys. Most of the BIOS setup utility hot keys can be used at any time during the setup navigation process. -
Page 40: Main Menu
MPC102-845 User’s Manual Main Menu System Time/Date Use this option to change the system time and date. Highlight System Time or System Date using the <Arrow> keys. Enter new values through the keyboard. Press the <Tab> key or the <Arrow> keys to move between fields. The date must be entered in MM/DD/YY format. The time is entered in HH:MM:SS format. -
Page 41: Advanced Menu
MPC102-845 User’s Manual Advanced Menu The Advanced menu allows users to set configuration of the CPU and other system devices. You can select any of the items in the left frame of the screen to go to the sub menus: ... - Page 42 MPC102-845 User’s Manual NCT6106D Super IO Configuration Use this screen to select options for the Super IO Configuration, and change the value of the selected option AMI BIOS Setup Utility...
- Page 43 MPC102-845 User’s Manual Serial Port 1-2 configuration Serial port This option used to enable or disable the serial port. Device Setting This item specifies the base I/O port address and Interrupt Request address of serial port. The port 1 Optimal setting is 3F8/IRQ4.
- Page 44 MPC102-845 User’s Manual Hardware Monitor This screen shows the Hardware Health Status in real time. ACPI Settings You can use this screen to select options for the ACPI Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen.
- Page 45 MPC102-845 User’s Manual CPU Configuration This screen shows the CPU Configuration and intel virtualization technology enable/disable selected. SATA Configuration You can use this screen to select options for the SATA Configuration, and change the value of the selected option. ...
- Page 46 MPC102-845 User’s Manual USB Configuration This screen shows the USB Configuration. Utility Configuration This screen shows the Utility Configuration. AMI BIOS Setup Utility...
- Page 47 MPC102-845 User’s Manual PCIE/mSATA Mini Card Configuration This screen shows the PCIE/mSATA Mini Card Configuration. Here are the options for your selection, PCIE, mSATA. AMI BIOS Setup Utility...
-
Page 48: Chipset Menu
MPC102-845 User’s Manual Chipset Menu The Chipset menu gives the North Bridge memory information and South Bridge TXE information. North Bridge This screen shows the North Bridge memory information. AMI BIOS Setup Utility... - Page 49 MPC102-845 User’s Manual South Bridge This screen shows the South Bridge TXE information. AMI BIOS Setup Utility...
-
Page 50: Security
MPC102-845 User’s Manual Security AMI BIOS Setup Utility... -
Page 51: Boot Menu
MPC102-845 User’s Manual Boot Menu The Boot menu allows users to change boot options of the system. You can select any of the items in the left frame of the screen to go to the sub menus: Setup Prompt Timeout... -
Page 52: Save & Exit
MPC102-845 User’s Manual Save & Exit AMI BIOS Setup Utility... -
Page 53: Chapter 4 Drivers Installation
MPC102-845 User’s Manual Chapter 4 Drivers Installation System MPC102-845 supports Windows 7, Windows 8/8.1 ,WES 7 and WE8S. To facilitate the installation of system driver, please carefully read the instructions in this chapter before start installing. 4.1.1 Win 7 Insert Driver CD and select the “\Drivers”. -
Page 54: Win 8/8.X
4.1.2 Win 8/8.x Insert Driver CD and select the “\Drivers”. Select all files and follow the installing procedure. Touch Screen The MPC102-845 uses the 5-wire analog resistive. There are the specification and driver installation which are listed below. 4.2.1 Specification Touch Screen... -
Page 55: Driver Installation- Windows 7/8.X
MPC102-845 User’s Manual 4.2.2 Driver Installation- Windows 7/8.x The MPC102-845 provides a touch screen driver that users can install it under the operating system Windows 7/8.x. To facilitate installation of the touch screen driver, you should read the instructions in this chapter carefully before you attempt installation. - Page 56 MPC102-845 User’s Manual Select the “Standard Calibrate” tab. Calibration: To adjust the display with touch panel, click “Calibration” and follow the calibrate point to do calibration; there are five points on screen for calibration. Press OK. Drivers Installation...
-
Page 57: Embedded O.s
MPC102-845 User’s Manual Embedded O.S. The MPC102-845 provides the WES 7 and WE8S Embedded. The O.S. is supported devices which are listed below. 4.3.1 WES 7 & WE8S Here are supported onboard devices: Onboard Multi I/O SATA HDD ...
Need help?
Do you have a question about the MPC102-845 and is the answer not in the manual?
Questions and answers