Disconnect An Rx Bluetooth ® Connection; Transmission Mode (Tx); Establish A Tx Bluetooth ® Connection - Imperial BART mini User Manual

6. COMMISSIONING AND OPERATION
track.
Press and hold the function button (3) to decrease the volume.
6.5.3 Disconnect an RX Bluetooth connection
®
To disconnect the Bluetooth connection to your mobile device,
®
hold the Bluetooth function key (4) for approx. 3 seconds.
®
The device is now in pairing mode again and is searching for new
Bluetooth ® connections. The LED indicator blinks blue.

6.6 Transmission mode (TX)

Connect to an audio source such as a cable or satellite receiver,
TV set, MP3 player or desktop PC/laptop.
Depending on the inputs of the device to be connected,
use the optical or analog audio cable. (Both cables are included in
the scope of delivery).
Switch the MODE switch (10) to TX.
If you are using an SPDIF cable, switch the signal switch (11) to
SPDIF, and use the SPDIF IN jack.
When using an analog signal via AUX, set the signal switch (11)
to AUX.
Press and hold the multifunction button (1) for 3 seconds to
switch on the BART Mini.
6.6.1. Establish a TX Bluetooth ® connection
The BART mini automatically starts searching for Bluetooth
®
receivers such as Bluetooth headphones or Bluetooth loud-
® ®
speakers. The LED indicator flashes green.
Note:
You can also manually search for Bluetooth ® receivers.
Press the Bluetooth function key (4).
®
Turn on the Bluetooth receiver that
®
you want to connect to.
Once the connection to a Bluetooth receiver device is
®
51