Commissioning And Operation; Connect Device To A Power Source; Switch On; Sswitch Off - Imperial BART mini User Manual

6. COMMISSIONING AND OPERATION

6.1 Connect device to a power source

Connect the device to a USB power source such as a USB power
supply unit or a USB port on your computer or laptop using the
USB charging cable supplied with the device.
As soon as a power supply has been established, the status LED
lights up red. The charging process of the internal battery starts.

6.2 Switch on

Press and hold the multifunction button (1) on the top of the de-
vice for 3 seconds. The unit will turn on.
The status LED indicates the current operating status.
Please also read chapter 6.4.
6.3 Switch off
To turn off the device, press and hold the multifunction button (1)
on the top of the device for 3 seconds. The unit will turn off.

6.4 Status LED

The following operating states can be displayed:
LED display
Continuous red light
LED blinks red
Power supply connected.
Device turned off
Internal battery is charging
Internal battery drained. The device must
be charged via the micro USB port (6).
48