Paula Deen kitchen electrics PDMGM Instructions Manual page 7

CLEANING
1. To disassemble the grinder for washing take the
grinder off the mixer base first. Turn the grinder
to the unlock position and lift of the base.
2. Remove the meat grinder holder from the feeder
tube by pulling up.
3. Remove the feeder tube by pressing down on
the unlock button on the meat grinder base and
turning to the unlock position.
4. Next, unscrew the locking washer from the
feeder tube. Then carefully remove the disc,
blade, and mixer.
CAUTION: The blade is extremely sharp, handle
with care.
5. Once the parts are disassembled wash each by
hand with non abrasive liquid and sponge. Let
each item dry before storing. The discs can be
stored in the side compartment of the mixer
base.
7