Table of Contents
Advertisement
CAUTION:
USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULTE IN HAZARDOUS RADIATION EXPOSURE.
THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE
PERSONNEL.
PRECAUTIONS FOR USE
INSTALLATION
UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.
•
DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE AND BEFORE
•
ALL OTHER CONNECTIONS HAVE BEEN MADE.
DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS
•
AROUND THE UNIT FOR VENTILATION.
CONNECTION
3.
CONNECT EXTERNAL POWER ADAPTOR TO EXTERNAL POWER ADAPTOR JACK.
4.
PUSH THE POWER KNOB TO SWITCH ON THE UNIT, STANDBY INDICATOR WILL BE OFF. IF THE
BACKLIGHT ON THE LCD DISPLAY LIGHTS UP, IT MEANS THE POWER SUPPLY IS NORMAL, NOW YOUR
SYSTEM IS READY FOR USE.
SETTING THE CLOCK
5
WHEN THE STANDBY INDICATOR LIGHT UP, UNIT IS IN THE STANDBY MODE.
6
DURING STANDBY MODE, SELECT BETWEEN 12H OR 24H MODE: PRESS MODE BUTTON, 12H / 24H WILL
BE FLASHING. PRESS SKIP UP OR SKIP DOWN BUTTON TO SELECT 12H / 24H MODE. PRESS MODE
BUTTON AGAIN TO CONFIRM.
7
SETTING HOUR: PRESS SKIP UP OR SKIP DOWN BUTTON TO SELECT THE CORRECT HOUR, THEN
PRESS MODE BUTTON TO CONFIRM.
8
SETTING MINUTE: AFTER STEP 3 IS COMPLETED, PRESS SKIP UP OR SKIP DOWN BUTTON TO SELECT
THE CORRECT MINUTE, THEN PRESS MODE BUTTON TO CONFIRM.
TIMER FUNCTION
1.
PUSH THE POWER KNOB TILL THE STANDBY INDICATOR LIGHT OFF. UNIT IS TURNING FROM
STANDBY MODE TO OPERATION MODE.
2.
WHEN THE UNIT IS IN OPERATION MODE, PRESS SLEEP BUTTON REPEATEDLY TO CHOOSE THE
SLEEP TIME MINUTES FROM 90>80>70.....>10 OFF.
3.
SLEEP TIME SETTING IS STORED WHEN THE "SLEEP" ICON LIGHTS UP ON THE DISPLAY.
4.
WHEN THE SLEEP TIME MINUTES IS OVER, UNIT WILL BE SWITCHED TO STANDBY MODE
AUTOMATICALLY.
5.
PRESS SLEEP BUTTON ONCE WHEN THE "SLEEP" ICON LIGHTS UP ON THE DISPLAY, USER CAN
CHECK HOW MANY MINUTUES LEFT BEFORE UNIT SWITCH TO STANDBY MODE.
LISTENING TO FM RADIO
FM RADIO TUNING
4. PRESS FUNCTION BUTTON TO SELECT RADIO MODE.
5. TUNE TO THE REQUIRED STATION BY PRESSING SKIP UP
SECONDS, AND THEN RELEASE.
6. THE UNIT WILL START SEEKING AUTOMATICALLY AND STOP WHEN A RADIO STATION IS FOUND.
AUTO PRESET FM RADIO STATIONS
4.
DURING RADIO MODE, PRESS THE PLAY/PAUSE
THE RADIO FREQUENCY. WHEN THE CLEAR SIGNAL IS FOUND, IT WILL AUTOMATICALLY STORE THE
RADIO STATION, STARTING FROM "CH 01".
5.
THE NUMBER OF STATIONS CAN BE FOUND AND STORED IS DEPENDED ON THE RECEPTION OF
DIFFERENT AREA AND COUNTRIES.
6.
AFTER AUTO-SCANNING, PRESS PRESET DOWN OR PRESET UP BUTTON TO SELECT DESIRED
STATION.
OR SKIP DOWN
BUTTON, THE UNIT WILL AUTOMATICLLY SCAN
BUTTON FOR 1-2
ž‰‹ƒ
Advertisement
Table of Contents
