Advertisement
Lint screen
The lint screen
3.
is inside the dryer
drum, on the
back
wall. Clean
it before
each
load. A screen
blocked
by lint
Pull straight
can increase
out.
drying
time.
1.
Use the finger holes to pull the lint
4.
screen
straight
out.
2. Lightly
squeeze
the
body,
as
5.
shown, while pulling
the cover off.
Roll lint off the
screen
with
your fingers.
1
DO NOT rinse
or wash the
screen.
Wet
lint is hard to
A---
11
remove.
Squeeze
body;
pull cover off.
Replace
the cover on the body
of
the lint screen.
Push the lint screen
straight
back
until it clicks into place.
Lint can gather
inside the dryer and create
a FIRE HAZARD. This lint
should
be removed
at least every 2 to 3 years, or more often, depending
on dryer usage.
ELECTRIC
DRYERS
Access Door
/Funnel
lgnlter
GAS DRYERS
Cleaning should be done only by a qualified
person.
WARNING:
l
Avold
electrical
shock
hazard
- unplug
power
supply
cord or turn off
electrlcal
power.
l
Avold InJury or damage
- do not
put hands
Inslde cabinet.
l
Make sure dryer Is cool.
1. Remove
back panel
(electric)
or lower access
panel
[gas].
2. Avoid damaging
wires,
thermostats,
funnel or igniter.
3. Remove
lint from shaded
area -
see art - with a soff brush or
vacuum
cleaner.
4. Replace
panel;
reconnect
and
re-level
dryer.
9
Lint removal
Advertisement
