Advertisement
KWM Gutterman Inc.
STEP #6: REVERSE #3 EXIT DRIVE ROLLER
FAILURE TO ALIGN ROLLER PROPERLY WILL CAUSE DAMAGE!
• Remove the backside exit top
roller by removing the two
RED flush head cap screws
with the 5/32 allen wrench
supplied in your conversion
kit.
• Remove roller from the shaft
and turn 180° as shown in the
pictures and place it back on
the shaft aligning the threaded
holes in the shaft.
• Retighten the two red flush
head cap screws
Advertisement
Need help?
Do you have a question about the 5 IRONMAN and is the answer not in the manual?
Questions and answers