Advertisement
KWM Gutterman Inc.
STEP #9: ADJUST SKATE ROLLERS
• There are four center skates in the machine, each have retractable rear skate forming rollers
that extend between 5" and 6" position.
• To change pull the adjusting pin up at each skate roller until the pin disengages from skate
shaft.
• Move the forming roller to the 5" position and push the adjusting pin back into place.
• Repeat this process for all 13 backside skate forming rollers.
Advertisement
Need help?
Do you have a question about the 5 IRONMAN and is the answer not in the manual?
Questions and answers