Advertisement
9
model no. 060-3888-6 | contact us: 1-866-523-5218
STEP 8:
Attach the back foot (14) to the
back legs using 2 M6 x 40 mm
bolts (12) and 2 M6 nyloc nuts (8).
NOTE: Do not over tighten the M8 nut and bolt securing each
back leg to the uprights otherwise it will not be possible to
fold the sawhorse for storage.
IMPORTANT: Be careful not to lose the 2 M6 x 20 mm
bolts and M6 nuts and the 2 locking pins during
assembly, as these will be needed if loading heavy logs.
STEP 9:
Complete the assembly by fully
tightening all nuts and bolts that
have been fitted at each step.
Advertisement
