Advertisement
5
model no. 060-3888-6 | contact us: 1-866-523-5218
STEP 1:
Connect the left upright (1) and 2
v-blades (2) using an M12 x 125 mm
bolt (4) and M12 nyloc nut (3). Note
that if the left upright is laid flat, as
shown in the diagram then it has a
longer ferrule projecting to the left.
longer
TOOLS REQUIRED: Spanners M6, M8, M10, M12
NOTE: Do not fully tighten nuts and bolts until after the
assembly is completed.
longer
Allen keys 5 mm, 6 mm, 8 mm, 10 mm
longer
STEP 2:
Connect the right upright (5) and
the remaining 2 v-blades (2) using
the remaining M12 x 125 mm bolt
(4) and M12 nyloc nut (3). Note that
if laid flat as shown, the right up-
right has the longer ferrule project-
ing to the right.
longer
Advertisement
