Lint Screen; Lint Removal - Whirlpool GLE7900XM Use & Care Manual

Lint screen
Clean the lint screen before each load. A screen blocked by lint can
increase drytng time and may be a FIRE HAZARD.
Open the lid and pull the lint screen
straight out.
DO NOT run the dryer with
the lint screen loose,
damaged or missing.
Doing so can cause over-
ROLL the lint off the screen
with your fingers.
DO NOT rinse or wash the screen.
Push the screen firmly back into
place
heating, can damage fabrics and
can be a FIRE HAZARD.
Lint removal
Lint can gather inside the dryer and create a fire hazard.This lint
should be removed every 2 to 3 years, or more ofien, depending on
dryer usage.
ELECTRIC DRYERS
Cleaning should be done only by a qualified person.
(b
l
Avoid electrical shock
hazard - unplug power
supply cord or turn off
electrical power.
' Avoid injury or damage - do not
put hands inside cabinet.
l
Make sure dryer is cool.
1.
Remove back panel.
2. Avoid damaging wires or ther-
mostats.
3. Remove lint from shaded area -
see art - with a soft brush or
vacuum cleaner.
4. Replace panel: reconnect and re-
level dryer
8