Menu Screens; How To Navigate Between Menus; How To Change Values And Settings - REC TEMOVEX RT400S-EC-RS Manual

OPERATION & CONTROL UNIT

Menu screens

The AHU's settings and status can be studied by scrolling the menu screens. No changes or
adjustments can be made without the authorized access code.
If no buttons are pressed for five minutes, the system will automatically revert to the control unit's Main
screen.
When the access code has been used to log in, the system will automatically log out when five
minutes have passed.

How to navigate between menus

An arrow in the upper or lower corner indicates that there are further menus to be seen if the UP or
DOWN arrow is used.
To highlight any of the menus, move the arrow to the left of the text using the UP or DOWN arrows.
Some menus have more headings than can be seen at first. These automatically turn up if you scroll
using the arrows. To access the chosen menu, press RIGHT.
In some cases there is an arrow to the right of the text, pointing to the right. This means that there are
further menus behind this heading if you press RIGHT.
Temperature
Mode
Alarm history
Authorization
12:01:31 11:57
Room temp.
Actual: 24.1 °C
Setpoint: 21.0 °C
ECO adjust: 2 °C

How to change values and settings

The yellow LED is flashing in menus where adjustments can be made by the user (see page 12).
Press OK.
The variable which may be adjusted flashes.
Use the arrows UP or DOWN to adjust.
Press OK to finalize.
The cursor automatically indicates next variable that is possible to adjust in this menu.
REC Indovent AB, Box 37, SE-431 21 Mölndal, Sweden
Menu screen, example
Menu screen, example
Air Handling Unit RT 250/400S-EC-RS
| +46-31-675500
14
| www.rec-indovent.se