INSTALLATION
Removing the DUC
The bottom card can now be reached and set up with
required functions.
REC Indovent AB, Box 37, SE-431 21 Mölndal, Sweden
DUC
Remove the DUC
from the circuit
card by squeezing
each top of the
four spacers with
After the installation of functions is done, re-fit the DUC in
a pair of pliers.
reverse order.
Squeeze one at a
time and ease the
DUC out at the
same time.
The DUC is now
attached to the
card by 2 flat
cables only.
The spring locks
on the plugs of
the DUC's flat
cables make it
easy to loosen
them from the
circuit card.
5
Air Handling Unit RT 250/400S-EC-RS
The bottom card's text guide.
|
+46-31-675500
|
www.rec-indovent.se