Cornelius Viper Elite Carbon Plunger Assembly Kit Installation Instructions page 3

Step
Access the plunger assembly mounting nuts
on both sides. Remove the plunger assembly
along with the mounting nuts out and scrap
4
removed parts. Replace the new plunger
assembly and mounting nuts provided with the
KIT.
5 Affix the diffuser back to merchandiser.
Carefully insert the shutter assembly and slide
6
down to its original position.
Tighten the stopper screws.This completes the
7
task.
© 2016, Cornelius Inc.
Viper Elite Carbon Plunger Assembly Kit Installation Instructions
Table 2. Installation Procedure
Action
Mounting
nuts
(Both sides)
Stopper
screws
- 3 -
Figure 4.
Slide down
Figure 5.
Figure 6.
Publication Number: 629097535INS