Cornelius Viper Elite Carbon Plunger Assembly Kit Installation Instructions

INSTALLATION INSTRUCTIONS
F
IELD
!
WARNING:
Before starting installation, read and understand all safety label and warnings on the machine. Also, review and
understand all safety instructions in the owners, installation and service manuals.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING:
Only trained and certified electrical, plumbing and refrigeration technicians should service this unit.
All wiring and plumbing must conform to national and local codes. Failure to comply could
result in serious injury, death or equipment damage.
!
WARNING:
Disconnect power to the unit before servicing. Follow all lock out/tag out procedures established by the user. Verify all
power is off to the unit before performing any work.
Failure to comply could result in serious injury, death or damage to the equipment.
!
CAUTION:
Always be sure to keep the area around the unit clean and free of clutter.
Failure to keep this area clean may result in injury or equipment damage.
Kit includes:
Item No.
1
2
3
The instructions in Table 2 should be used for installation of the plunger assembly kit on Viper Elite Carbon units.
Release Date: February 08, 2016
© 2016, Cornelius Inc.
I
NSTALLATION
Table 1. Parts List
Part No.
186116000 Nut Hex 1/4-20 Sspa
620063361 Plunger Spring Press Fit Assembly
629097535INS Manl Kit Plunger Assembly Viper Elite
www.cornelius.com
Viper Elite Carbon Plunger Assembly Kit Installation Instructions
I
NSTRUCTIONS FOR
Description
- 1 -
P
LUNGER
Quantity
4
2
1
Revision: A
Publication Number: 629097535INS