Performing The Operating System Update Via Ftp; Performing The Operating System Update Via Usb - Jetter JVM-104-O16 User Manual

Jetter AG

7.13.2 Performing the operating system update via FTP

Update the
operating system

7.13.3 Performing the operating system update via USB

Files directory on
the USB flash drive
Contents of
the batch file
JVM-104-O16 User Manual
An FTP client lets you transfer an OS file to the JVM-104-O16.
ü
An OS file for the JVM-104-O16 is available.
ü
An FTP connection to the device has been established.
ü
The operating system of the JVM-104-O16 is running.
ü
During the operating system update, the device is powered on.
1. Open an FTP connection to the JVM-104-O16.
2. Log in with administrator rights.
3. Navigate to the directory \App.
4. Transfer the OS file
5. Wait until the update process is completed
6. Use a text editor and create on your PC a configuration file named config.ini.
7. Enter into this file the path and the name of the OS file on the device, e.g.
\app\jvm_ce0_1.00.0.07.os.
8. Copy this file into the directory \App as well.
9. Clear the FTP connection.
10. To activate the newly installed OS, re-boot the device.
11. The new OS is being installed. Wait at least one minute.
12. Restart the device.
A USB flash drive lets you transfer an OS file to the JVM-104-O16.
The USB flash drive contains the following files:
■ The autostart.bat file
■ The new OS
■ Other files to be copied (optional)
The batch file autostart.bat must have the following contents:
@echo off
if not exist \app\autostart.exe goto end
if exist \app\update.ini goto end
if exist \app\usb_update_process_marker goto dm
echo \data\update\jvm_ce0_1.00.0.04.os >\app\update.ini
md \data\update
copy \%1\jvm_ce0_1.00.0.04.os \data\update\jvm_ce0_1.00.0.04.os
echo >\app\usb_update_process_marker
md \app\progtest
@cmd /c start \App\sys\jvcm_si 102 (ergänzen)
del \System\reset.exe
goto end
:dm
del \app\usb_update_process_marker
:end
Programming | 7
46 / 66