Additional Features; Troubleshooting - Pelonis PSH700S Owner's Manual

CAUTION
● Safety Protection
1.Overheat protection: When the temperature in the fan heater is too high due to abnormality in
the use environment or improper use, the thermostat device can automatically cut off the power
and the fan heater stops working. After the whole fan heater is cooling, the fan heater can return
to the normal use after removing the abnormality.
2.Inversion/Tip-over protection: When the whole fan heater is inverted (tipped over) or leave the
surface where it is placed(like desk or floor, etc.), the safety system will automatically cut off the
power, and return to the work state before inversion after the body is placed upright.
The inversion/tip-over protection is not sensitive when this fan heater is placed on carpet, please
don't use it on carpet.

ADDITIONAL FEATURES

This fan heater has additional features:
•
Convenient Carry Handle – allows for easy transport from room to room.

TROUBLESHOOTING

If your fan heater fails to operate, please follow these instructions:
•
Ensure that your circuit breaker or fuse is working properly.
•
Be sure the fan heater is plugged in and that the electrical outlet is working properly.
Check for any obstruction. If you find any obstruction, turn the fan heater "OFF". Unplug
•
the fan heater and wait a few minutes for it to cool down. Carefully remove the
obstruction.Plug the fan heater in and turn it on again by referring to the OPERATING
INSTRUCTIONS.
NOTE: IF YOU EXPERIENCE A PROBLEM WITH YOUR FAN HEATER, PLEASE SEE THE WARRANTY
INFORMATION FOR INSTRUCTIONS. PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE FAN
HEATER YOURSELF. DOING SO MAY VOID THE WARRANTY AND COULD CAUSE DAMAGE OR
PERSONAL INJURY. IF THE PROBLEM STILL PERSISTS, PLEASE CONTACT US BY REFERRING TO
THE SERVICE & SUPPORT INFORMATION ON THE FOLLOWING PAGE.
4