Firmware Upgrade - Bose ControlSpace AMS-8 Software Manual

1.8 Firmware upgrade

1. ControlSpace
change between European, American, Japanese or Australian FM-band settings, see below module:
Press 1 of the 4 buttons above, followed by the update button, to change to another FM-band setting.
Use this upgrade module to upload a new firmware version into the AMS-8 system, or to upload new Bose
Loudspeaker EQ curves and Graphic EQ files. This module also allows to update the date and time of the
AMS-8 system (date and time from the connected computer will be used to synchronize).
Press the following buttons to:
open and select new Firmware, Bose loudspeaker EQ curves, or Graphic EQ files
upload the previous selected file to the AMS-8 system
update the date and time settings of the AMS-8 system
Note: During an upload of one of the above, one should never turn off the AMS-8 system!
Note: If new Bose loudspeaker EQ curves have been uploaded to the system, make sure to check the room EQ
settings of each room again. The ordering of the internal library with EQ curves may have been changed.
AMS-8 LIvE Installer Software
™
19