Product Installation Method - ECO-WORTHY SOLAR TRICKLE CHARGER User Manual

1. Solar power standard testing conditions: solar radiation
1000W/㎡, temperature 25℃, air mass AM1.5.
2. If used in conditions that fall outside of the standard
testing conditions, the solar panelʼs electrical output
capacity may change in a non-linear way.
3. Because of the scattered nature of the silicone crystalʼs
parameters, electrical properties may change under weak
light conditions.
4. The solar panelʼs ability to produce electricity is closely
connected to the strength of the sunlight, temperature of
the environment, installation angle, and other factors.

Product Installation Method

This product can be installed using two methods:
1: Use the 4 suction cups that come with the product to attach it
to the inside of the carʼs windshield or to anywhere on the carʼs
exterior.
2: The solar panelʼs rear straps can also be used to secure it to
your vehicleʼs sun visor.
Securing the solar panel
to the windshield
Solar trickle charger-Battery maintainer
Securing the solar panel to a sun
Wiring the Solar Panel visor
4