Table of Contents
Advertisement
In the task bar of Windows™ XP the following voiceRECORDER 300 logo is
displayed. The text in the logo is grey if the tiptel voiceRECORDER 300 is not
connected to the PC.
Please note that the logos under Windows™ 2000 could be different:
Connect the USB cable to the tiptel voiceRECORDER 300 and the other end of
2.
the USB cable to the USB port of your PC or laptop. The LED 'POWER' lights.
The text VR 300 in the task bar switches to red.
You are asked to enter your own telephone number.
3.
Enter your own telephone number.
4.
Connect your analogue telephone line with the socket 'LINE' of the
tiptel voiceRECORDER 300.
5.
Use the supplied telephone connection cable and connect your telephone to
the socket 'TEL' of the tiptel voiceRECORDER 300.
To check if all connections of the tiptel voiceRECORDER 300 are correct lift the
receiver of your telephone and click on 'Test'. The telephone is switched to the
tiptel voiceRECORDER 300 and you hear a tone.
6.
Now click on 'OK'.
Installation
6
Advertisement
Table of Contents
