Related Manuals for Party Tents Direct Weekender West Coast Frame
Summary of Contents for Party Tents Direct Weekender West Coast Frame
- Page 1 888 291-4615 (toll free) Assembly Instructions WEEKENDER– WEST COAST FRAME TENTS 10´x10´ / 20´x30´ 10´x 20´ / 20´x 40´ 20´x20´ /...
- Page 2 PARTY TENTS DIRECT.COM 888 291-4615 (toll free) WEEKENDER–WEST COAST FRAME TENT OVERVIEW West Coast designed tents involved less frame work, with no center poles. This tent features stronger tubes, fewer parts which makes for faster set-up. It’s worth pointing out smaller parts means; less load, easy to assemble, faster set-up and faster strike time.
- Page 3 PARTY TENTS DIRECT.COM 888 291- 4615 (toll free) STEP 1. CHECK ITEM LIST 10 x 10 WEEKENDER (WCF) 5/16 x 12in. 1/2 x 20in. 10 x 20 WEEKENDER (WCF) 5/16 x 12in. 1/2 x 20in.
- Page 4 PARTY TENTS DIRECT.COM 888 291-4615 (toll free) STEP 1. CHECK ITEM LIST (continued) 20 x 20 WEEKENDER (WCF) 5/16 x 12in. 1/2 x 20in. 20 x 30 WEEKENDER (WCF) 5/16 x 12in. 1/2 x 20in.
- Page 5 PARTY TENTS DIRECT.COM 888 291- 4615 (toll free) STEP 1. CHECK ITEM LIST (continued) 20 x 40 WEEKENDER (WCF) 5/16 x 12in. 1/2 x 20in.
-
Page 6: Step 2. Safety Check List
PARTY TENTS DIRECT.COM 888 291-4615 (toll free) STEP 1. CONTINUED Estimated Recommended Tent Size Quantity Tools This item is very important in 6ft. step ladders 10 x 10 none the process, Frame Tent Jack Sledge Hammer 10 x 20 none (sold separately). - Page 7 PARTY TENTS DIRECT.COM 888 291-4615 (toll free) STEP 3. LAYOUT FRAME • Place all tent poles and fittings on the ground, in the location you have Position parts in the exact location of finished tent selected for the finished tent •...
- Page 8 PARTY TENTS DIRECT.COM 888 291-4615 (toll free) STEP 5. COMPLETED FRAME • Now that the frame portion is complete and while the frame is still on the ground, double check all connections • Also, with plenty of hands on deck, lift and adjust frame position if needed, at this point •...
-
Page 9: Step 10. Installing Legs
PARTY TENTS DIRECT.COM 888 291-4615 (toll free) STEP 8. CANOPY CONNECTIONS • After canopy is pulled over frame and (PE canopy) (PVC canopy) and corners are pulled into position, velcro corner seams together, loosely— Under canopy tighten after legs are installed there will be PE canopys several Spring... - Page 10 PARTY TENTS DIRECT.COM 888 291-4615 (toll free) • For larger tents, (20x20 and larger) STEP 10. INSTALLING LEGS (20x20 and larger tents) frame tent jacks should be used to raise the frame and install the leg poles • Locate one of the long sides of the frame—this will be raised first, while the 20 x 40 example opposite side remains on the ground...
- Page 11 PARTY TENTS DIRECT.COM 888 291-4615 (toll free) • As the assembly nears completion it STEP 12. SECURING ROPES is time to tighten all ratchet straps • Keep an eye any lean that might be caused Ratchet Straps by the tightening process should be tight •...
- Page 12 PARTY TENTS DIRECT.COM 888 291-4615 (toll free) (basically, reverse order from assembly) STRIKE PROCEDURE 1.) Undo ratchet strap assemblies/untie ropes 7.) Lower rest of frame to ground 2.) Unfasten spring buckle straps, under canopy 8.) Lay tarp next to a long side of frame 3.) Remove leg poles, on one long side 9.) Loosen canopy corners (use tent jacks for larger tents)
- Page 13 Appendix A. Weekender-WCF Frame Tent 10´ x 10´ Weekender-WCF Frame Tent 10´ x 20´...
- Page 14 Appendix B. Weekender-WCF Frame Tent 20´ x 20´ Cross Bar (6) and (8) share the bolt from the two poles it connects to.
- Page 15 Appendix C. Weekender-WCF Frame Tent 20´ x 30´ Cross Bar (6) and (8) share the bolt from the two poles it connects to.
- Page 16 Appendix D. Weekender-WCF Frame Tent 20´ x 40´ (6) (8) Cross Bar (6) and (8) share the bolt from the two poles it connects to. WC Steel Frame Tent – 20´ x 40´...