RPS Studio RS-CS1070 Quick Start Manual

RPS Studio RS-CS1070 Quick Start Manual

Copy stand

Advertisement

1 Year Limited Warranty.

Dot Line Corp. warrants that if the accompanying product proves to be
defective to the original purchaser in material or workmanship within 1
year from the original retail purchase, Dot Line Corp. will, at its option,
either repair or replace same without charge (but no cash refund will be
made).
What you must do to enforce the warranty: You must deliver, mail or
ship the product together with the original bill of sale, to:
Dot Line Corp. 9420 Eton Ave., Chatsworth, CA 91311
Phone 1-800-423-2624 Fax 818-700-9797.
Limitation of Liability and Remedies: This warranty is void if any
defects are caused by abuse, misuse, negligence or unauthorized
repairs. All liability for incidental or consequential damages is specifically
excluded. The company shall have no liability for any damages due to
lost profits, loss of use or anticipated benefits, or other incidental,
consequential, special or punitive damages arising from the use of, or
inability to use, this product, whether arising out of contract, negligence,
tort, or under any warranty, even if the company has been advised of the
possibility of such damages. The Company's liability for damages in no
event shall exceed the amount paid for the product. The Company
neither assumes nor authorizes anyone to assume for it any other
liabilities.
Some states do not allow for the exclusion of incidental or consequential
damages, so the above exclusion may not apply to you. This warranty
gives you specific legal rights and you may have other rights which vary
from state to state.
These Instructions are for RS-CS Copy Stand Pictures may vary.
Specifications are subject to change. Printed December 2007.
RPS Studio Products are Marketed exclusively by:
Dot Line Corp. 9420 Eton Ave.
Chatsworth, CA 91311
818-700-9997 • Fax 818-700-9797
www.dotlinecorp.com
Product Made in China © Dot Line Corp. 2007
RS-CS1070
Copy Stand

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RS-CS1070 and is the answer not in the manual?

Questions and answers

Summary of Contents for RPS Studio RS-CS1070

  • Page 1 These Instructions are for RS-CS Copy Stand Pictures may vary. Specifications are subject to change. Printed December 2007. RPS Studio Products are Marketed exclusively by: Dot Line Corp. 9420 Eton Ave. Chatsworth, CA 91311 818-700-9997 • Fax 818-700-9797 www.dotlinecorp.com...
  • Page 2 RS-CS1070 Copy Stand Thank you for your purchase of the RPS Studio CS-1070 copy stand. The stand comes in two boxes; one for the baseboard and one for the upright. Mounting the upright to the base Inside the box for the upright is a white box attached via rubber bands to the upright.

Table of Contents