Related Manuals for Powercast WCG91501
Summary of Contents for Powercast WCG91501
- Page 1 WCG91501 USER GUIDE compatible with Nintendo Joy-Con controllers* energy PowerSpot compatible...
-
Page 2: Table Of Contents
Table of Contents Product Description PowerSpot transmitter Charging your Grip LED Status Indicator Recommended Charging Distances The PowerSpot App Updating Firmware Putting Your Switch to Sleep Troubleshooting 12-13 Compliance Statements Support... -
Page 3: Product Description
Overview Product Description The Powercast Wireless Charging Grip (WCG91501) has been designed to charge its internal battery wirelessly while in range of a PowerSpot TX91503 ® RF wireless power transmitter. The Wireless Charging Grip uses stored, wirelessly harvested power to recharge compatible Nintendo Joy-Con... -
Page 4: Powerspot Transmitter
PowerSpot Transmitter Charge your Wireless Charging Grip over the air using your PowerSpot transmitter Before using your Wireless Charging Grip, set up your PowerSpot transmitter using the instructions included in its package. For more information, visit www.powercastco.com/products/PowerSpot... -
Page 5: Charging Your Grip
Charging Your Grip 1. Turn on your Wireless Charging Grip. Using 2. Slide your Joy-Cons into the Grip. Slide the something small, such as a paper clip or ink pen, Joy-Con controllers downward into the brackets. flip the switch on the back of your Wireless They will lightly click into place once secured. - Page 6 Charging Your Grip 3. Place your Wireless Charging Grip within a foot of your PowerSpot transmitter. The closer your Wireless Charging Grip is to your PowerSpot transmitter, the faster it will charge. Follow these placement instructions and refer to the LED Status Indicator table on the next page to optimize wireless charging.
-
Page 7: Led Status Indicator
LED Status Indicator Description Fast charging 1x BLINK GREEN Fully charged 2x BLINK 1x BLINK Medium speed charging. Move Grip closer YELLOW to PowerSpot for faster charging Move Grip closer to PowerSpot transmitter 1x BLINK for faster charging Low battery, please recharge 2x BLINK Grip is connected to power and charging via USB-C BLUE... -
Page 8: Recommended Charging Distances
Recommended Charging Distances The closer your Wireless Charging Grip is to the PowerSpot transmitter, the faster it will charge. Light gamers can charge at a farther distance, while heavy gamers will want to charge their Grip at a closer range to the PowerSpot transmitter. Use the Grip’s status indicator LED to determine how far away to charge your Grip. -
Page 9: The Powerspot App
The PowerSpot App Use the PowerSpot app to monitor charging status of your Wireless Charging Grip view your PowerSpot-enabled devices update firmware snooze your PowerSpot transmitter... -
Page 10: Updating Firmware
Updating Firmware 2. Connect the Wireless Charging Grip to power 3. Flip the rear switch back to “I” 1 . Flip the rear switch from “I” to “O” using the USB-C port on top update mode will automatically time out after 2 Grip rear view minutes of inactivity 5. -
Page 11: Putting Your Switch To Sleep
Putting Your Switch to Sleep It is highly recommended that the power settings on your Nintendo Switch be set to go to sleep when not in use. Without the Switch going to sleep, the Joy-Con controllers will consume power constantly inside the Wireless Charging Grip, thus substantially reducing the battery life. -
Page 12: Troubleshooting
Troubleshooting I put my Wireless Charging Grip in front of my PowerSpot wireless power transmitter and the LED on my Wireless Charging Grip did not respond. Verify that the switch on the back of the Wireless Charging Grip is turned on (“I”) and also verify that the PowerSpot wireless power transmitter is plugged in. - Page 13 Can I use more than one PowerSpot wireless power transmitter at a time? Yes! However if you are using more than one transmitter at a time, be sure to position them so that the Powercast logos are not facing each other (directly or at an angle) and the transmitters are at least 6 feet apart from one another.
-
Page 14: Compliance Statements
FCC and IC Radiation Exposure Statement: This portable equipment with its antenna complies with FCC’s and IC’s RF radiation Powercast products and technology are covered by one or more patents and other exposure limits set forth for an uncontrolled environment. -
Page 15: Support
Support Technical support for Powercast products can be initiated through the following methods: Website contact form: www.powercastco.com/contact Telephone: +1 412-455-5800 www.powercastco.com...
Need help?
Do you have a question about the WCG91501 and is the answer not in the manual?
Questions and answers