Manual pairing
1
Make sure the Sound Bar and wireless subwoofer are
properly connected to the power supply.
2
Press PAIR at the back of the wireless subwoofer until
the amber LED on the subwoofer flashes slowly.
➜ The wireless subwoofer is ready to pair.
➜
3
Press
remote control to power on your Sound Bar main unit.
➜ The Sound Bar and wireless subwoofer will pair
➜
automatically.
➜ Pairing is successful. The amber LED remains on
➜
solidly.
Note
If the amber LED at the back of the subwoofer still
•
flashes after pairing, it means pairing is not successful.
Disconnect the AC power cord from the wireless
subwoofer and then connect again after 3 minutes.
Then repeat steps 1 to 3.
on the top panel of your Sound Bar main unit or
20