H3C S5830V2 Series Mce Command Reference page 8

Parameters
vpn-instance vpn-instance-name: Specifies the name of a VPN instance, a string of 1 to 31 case-sensitive
characters.
group-name: Specifies the name of a BGP peer group, a string of 1 to 47 case-sensitive characters. If no
peer group is specified, this command displays information about all peer groups.
Examples
# Display information about all BGP peer groups for VPN instance vpn1.
<Sysname> display bgp vpnv4 vpn-instance vpn1 group
BGP peer group: grp1
Remote AS number: Not specified
Type: external
Members:
10.1.1.1
BGP peer group: grp2
Remote AS: 100
Type: internal
Members:
1.1.1.1
# Display information about the BGP VPNv4 peer group grp1 for VPN instance vpn1.
<Sysname> display bgp vpnv4 vpn-instance vpn1 group grp1
BGP peer group: grp1
Remote AS number: Not specified
Type: external
Maximum allowed prefix number: 4294967295
Threshold: 75%
Configured hold timer value: 180 seconds
Keepalive timer value: 60 seconds
Minimum time between advertisements: 30 seconds
Peer preferred value: 0
Members:
Peer
10.1.1.1
Table 1 Output description
Field
BGP peer-group
remote AS number
Type
Maximum allowed prefix number
Threshold
MsgRcvd
AS MsgRcvd MsgSent OutQ PrefRcv Up/Down
10 0
Description
Name of the BGP VPNv4 peer group.
Number of the remote AS.
Peer group type, external or internal.
Maximum number of routes that the VPN instance supports.
Threshold value.
If the threshold is reached, the device generates prompt information.
Number of messages received.
2
0 0 0 00:01:02 Connect
State