Related Manuals for WARDRAY PREMISE MR4500
Summary of Contents for WARDRAY PREMISE MR4500
- Page 1 July 2015 GEN.S.19/175e GEN.S.17/175 DECEMBER 2019 MR4500 MR Conditional Folding Portering Chair OPERATORS MANUAL...
- Page 2 Thank you for purchasing this MR Conditional product. Manufactured and tested to the highest standards it is guaranteed MR Conditional to 7.0T. Our products are manufactured by Wardray Premise Ltd to BS EN ISO 13485:2016 and are CE marked. Manufacturing address:...
- Page 3 New Safety Definitions for MRI as Defined by International Standard F2503-13 MR SAFE: An item that poses no known hazards resulting from exposure to any MR environment. MR SAFE items are composed of materials that are electrically nonconductive, non-metallic, and nonmagnetic. MR CONDITIONAL: An item with demonstrated safety in the MR environment within defined conditions.
-
Page 4: Specification
The armrests are manufactured from 316 stainless steel which whilst also being MR conditional, give added strength. It is advisable that this product is inspected and serviced every 12 months by a Wardray Premise trained technician. A Service contract package is available, and details are available upon request from our Service Department on +44 (0)20 8398 9911. - Page 5 MR4500 Portering chair parts reference In folded position Push handles Backrest Adjustable armrest Rear Brake Seat Serial No. located Rear Wheel on upright Plungers Threaded Lobe Knob Front Brake Footrests Castor...
- Page 6 Operating Instructions Armrest Armrests have been fitted to both sides of the chair these are to aide comfort whilst the patient is sat in the chair. The armrests should be in the lowered position when the patient is getting in and out of the portering chair.
- Page 7 Operating Instructions Footrests Designed for patient comfort and ease of use the footrests can be removed completely (Fig 3) if not required. To remove the footrests, loosen the threaded lobe knob on the front side of the chair (Fig 4) by unscrewing in a counter clockwise direction.
-
Page 8: Braking System
Operating Instructions Braking System The folding portering chair is fitted with two 150mm diameter, individually braked castors on the front of the chair (Fig 1) and a rear brake is also fitted to the right hand wheel (Fig 3) . To engage the brakes on the front castors place your foot on the front part of the brake lever (Fig 1) and push down firmly, the brake will lock in place and stop the castor from moving. - Page 9 Operating Instructions Folded Position To place the chair into the folded position rotate the footrests into an upright position (Fig 1) and simply lift the seat. The chair will assume the folded position (Fig 2). There is no locking mechanism, the weight of the chair keeps it in the folded position. To open the chair, from its folded position, stand behind the chair and widen the push handles apart.
-
Page 10: Do's And Don'ts
There are no known types of approved tie down systems for safe transportation of a user in a portering chair, in a moving vehicle of any type. The MR4500 MR conditional portering chair is intended for the assisted movement of a ... - Page 11 Do’s and Don’ts Don't: attempt to pull the portering chair with a patient in. It must be pushed at all times. operate the portering chair on roads, streets or highways. use to go up or down inclines of greater than 9 degrees. ...
- Page 12 ‘tipped out’. It is recommended that the chair should be serviced regularly, but only by Wardray Premise trained engineers, as they will carry the correct spares to guarantee the continued safety and compatibility of the chair.
-
Page 13: General Maintenance
Check operation of footrest including possible damage to heel straps. Do not attempt to rectify any faults on the chair without contacting Wardray Premise. There is no Service Manual available for this product. Please register your product with us, via the Warranty Registration Form (see page 15), for ease of contact in case of urgent upgrades or recalls. - Page 14 10000 parts per million chlorine combined with a detergent. Alternatively, follow your local guidelines or instructions. If any of the above give cause for concern, please contact your Wardray Premise service provider. EU Declarations of Conformity and Magnetic Testing...