Electrical Wiring; Connecting The Power Supply - Ultraflow UMDZ7500/80/30 Operating Maintenance Instructions & Part List

Submersible sump pump range
Table of Contents

Advertisement

CAUTION:
• If large quantities of earth are sucked
up, damage resulting from erosion in
the pump can lead to electrical leakage
and shock.

ELECTRICAL WIRING

PERFORMING ELECTRICAL
WIRING
WARNING:
• Electrical Wiring should be perfromed
by a qualified/licenced person in
accord with all applicable regulations.
Failure to observe this precaution not
only risks breaking the law but is
extremely dangerous.
• Incorrect wiring can lead to electrical
leakage, electrical shock, fire, property
damage, injury or death.
• Always make sure the pump is
equipped with the specified overload
protectors and fuses or breakers, as
required by law, so as to prevent
electrical shock from an electrical leak
or pump malfunction.
• The voltage, frequency and current
rating are displayed on the name plate,
please ensure that the power supply
meets the requirements.
8 To prevent the pump strainer stand
from becoming submerged in mud,
causing it to suck in debris, mount it on
a block or firm base.
GROUNDING
WARNING:
• Do not use the pump without first
earthing it properly. Failure to earth it
can lead to electrical shock from an
electrical leak or pump malfunction.
CAUTION:
• Do not attach the earth wire to a gas
pipe, water pipe, lightening arrestor or
telephone earth wire. Improper earthing
can result in electrical shock.
CONNECTING THE POWER
SUPPLY
WARNING:
• Before connecting leads to the
terminal, make certain the power
supply is turned off (circuit breaker,
etc), to avoid electrical shock, shorting,
5

Advertisement

Table of Contents
loading

Table of Contents