Related Manuals for Apantac HDM2.0-4x4-UHD-II
Summary of Contents for Apantac HDM2.0-4x4-UHD-II
- Page 1 HDM2.0-4x4-UHD-II 4x4 UHD with HDR HDMI Matrix HDM2.0-4x4-UHD-II User Manual V1.1 APANTAC LLC, 10200 SW Allen Blvd. Suite C, Beaverton, OR 97005 USA info@apantac.com, TEL: +1 503 968 3000, FAX: +1 503 389 7921...
-
Page 2: Table Of Contents
Warranty Statement ................... 11 Comformity ....................12 Limitation of Liability .................. 12 Contact Apantac Technical Support ............13 APANTAC LLC, 10200 SW Allen Blvd. Suite C, Beaverton, OR 97005 USA info@apantac.com, TEL: +1 503 968 3000, FAX: +1 503 389 7921... -
Page 3: What's In The Box
HDM2.0-4x4-UHD-II 1.0 What’s in the Box PRODUCT HDM2.0-4x4-UHD-II Rack Ears Foot Pads IR Receiver Cable Remote Control 2.0 Key Features – Supports resolutions up to UHD@60Hz (4:4:4) – Supports pixel-clock up to 600 MHz – Supports HDR – Supports LPCM, Dolby TrueHD, and DTS-HD Master audio –... -
Page 4: Front Panel
/ output status, IP address, keypad lock setting, reset to factory default and firmware version. ENTER Button: Confirm the setting of the MENU button APANTAC LLC, 10200 SW Allen Blvd. Suite C, Beaverton, OR 97005 USA info@apantac.com, TEL: +1 503 968 3000, FAX: +1 503 389 7921... -
Page 5: Rear Panel
4. The IP address will be restored to the default: 192.168.0.3 5.1 IR Blaster Pin Definitions 1: IR LED+ 2: IR LED- APANTAC LLC, 10200 SW Allen Blvd. Suite C, Beaverton, OR 97005 USA info@apantac.com, TEL: +1 503 968 3000, FAX: +1 503 389 7921... -
Page 6: Ir Receiver Pin Definitions
Description IP Address / Port IP Address 192.168.0.3 Subnet Mask 255.255.255.0 Gateway 192.168.0.1 APANTAC LLC, 10200 SW Allen Blvd. Suite C, Beaverton, OR 97005 USA info@apantac.com, TEL: +1 503 968 3000, FAX: +1 503 389 7921... -
Page 7: Telnet
1. Open a Browser on your PC and type in the default IP address http://192.168.0.3/ connect the IPM web. APANTAC LLC, 10200 SW Allen Blvd. Suite C, Beaverton, OR 97005 USA info@apantac.com, TEL: +1 503 968 3000, FAX: +1 503 389 7921... -
Page 8: Rs-232 Amd Tcp/Ip Commands
(0d) at the end to execute the command. If a new command is received, a prompt will appear APANTAC LLC, 10200 SW Allen Blvd. Suite C, Beaverton, OR 97005 USA info@apantac.com, TEL: +1 503 968 3000, FAX: +1 503 389 7921... - Page 9 = [0-1] (0: disable), y = [0-n] (0: all outputs) Examples: r 1 2 Examples: r 0 APANTAC LLC, 10200 SW Allen Blvd. Suite C, Beaverton, OR 97005 USA info@apantac.com, TEL: +1 503 968 3000, FAX: +1 503 389 7921...
- Page 10 2: Full HD 3: 4K30 4: 4K HDR Examples: edid 0 3. Other commands have no parameters. APANTAC LLC, 10200 SW Allen Blvd. Suite C, Beaverton, OR 97005 USA info@apantac.com, TEL: +1 503 968 3000, FAX: +1 503 389 7921...
- Page 11 Renew the Default Gateway setdns Renew the DNS Servers setdhcp Set DHCP client Enable or Disable APANTAC LLC, 10200 SW Allen Blvd. Suite C, Beaverton, OR 97005 USA info@apantac.com, TEL: +1 503 968 3000, FAX: +1 503 389 7921...
-
Page 12: Copywright & Trademark
Warranty Statement Apantac LLC (herein after referred to as “Apantac”) warrants to the original purchaser of the products manufactured by Apantac (the “Product,”) will be free from defects in material and workmanship for a period of three (3) year from the date of shipment of the Product to the purchaser. -
Page 13: Comformity
EU RoHS 10 Substances Amendment Limitation of Liability Apantac’s liability under this warranty shall not exceed the purchase price paid for the defective product. In no event shall Apantac be liable for any incidental, special or consequential damages, including without limitation, loss of profits for any breach of this warranty. -
Page 14: Contact Apantac Technical Support
Phone: +1 503 455 4663 Email: Randall.Durand@Apantac.com Daryn Edwards Technical Support Engineer Phone: +1 (503) 968-3000 Email: Daryn.Edwards@Apantac.com APANTAC LLC, 10200 SW Allen Blvd. Suite C, Beaverton, OR 97005 USA info@apantac.com, TEL: +1 503 968 3000, FAX: +1 503 389 7921...
Need help?
Do you have a question about the HDM2.0-4x4-UHD-II and is the answer not in the manual?
Questions and answers