Conducting The Procedure; Active Area Search - SCENAR-COSMODIC EX715Ag User Manual

Conducting the Procedure

In the working mode the screen looks as follows:

Active Area Search

treatment should be started from. During 1 second it
measures the activity level of the area which contacts the
electrodes. The electrodes should be kept on the skin without
moving.
The activity level of the area part being measured is indicated
with a vertical bar in the right lower part of the display at each
measurement.
Take the electrodes off the skin when the measurement is
finished, and wait until the "C" indicator goes off. Then place
the electrodes on the next part of the area. The
measurements (vertical bars) are saved on the screen. It is
Active area search mode allows defining
the preferred part of the area which the
25