Home Connect; Setting Up Home Connect - Bosch KIF81H Series Instructions For Use Manual

o

Home Connect

T his appliance is Wi-Fi-capable and can
H o m e C o n n e c t
be remotely controlled using a mobile
device.
Wi-Fi is a registered trademark of
Note:
the Wi-Fi Alliance.
In the following cases, the appliance
functions like a refrigerator without a
network connection and can still be
manually operated via the controls:
The appliance is not connected to a
■
home network.
Home Connect service is not
■
available in the country in which the
appliance is set up. For an overview
of the countries in which Home
Connect is available, see
www.home-connect.com.
Please observe the safety
Note:
information in this instruction manual.
Ensure that this is also observed if you
operate the appliance via the Home
Connect app and are not at home when
doing so.
~ "Safety instructions" on page 3
Follow the instructions in the Home
Connect app as well.

Setting up Home Connect

Notes
Observe the Home Connect
■
supplementary sheet, which is
available for download under
www.bosch-home.com with the
instructions. To do so, enter the
E-number of your appliance in the
search field.
After switching on the appliance,
■
wait at least two minutes until
internal device initialisation is
complete. Only then start setting up
Home Connect.
To implement settings with Home
■
Connect, the Home Connect app
must be installed on your mobile
device.
Observe the supplied Home
Connect documents for this.
Follow the steps specified by the
app to implement the settings.
The Home Connect menu will close
■
automatically when the appliance is
not operated for a lengthy period of
time. You can find information on
how to open the Home Connect
menu at the start of the appropriate
sections.
Automatic connection with the home
network (WLAN)
If a WLAN router with WPS function is
available, the refrigerator can be
automatically connected to the home
network.
Press E button.
1.
Temperature display shows Cn.
Press super button until temperature
2.
display shows AC.
Press ¿ button.
3.
The appliance is ready for automatic
connection.
The temperature display shows an
animation for 2 minutes.
The appliance is ready for automatic
connection for as long as the
animation is displayed.
Within those 2 minutes activate the
4.
WPS function on the home network
router (e.g. using
WPS/WLAN button. Observe the
information on this topic in the router
documentation).
If connection is successful, On
flashes in the temperature display.
The refrigerator is ready to connect
to the app.
If the temperature display shows
Note:
OF, no connection could be
established.
Home Connect en
11