Download Print this page

Overdrive KR-TUTRBK Instruction

Universal trunk mounted bike rack, 3 bike capacity

Instruction

Universal Trunk Mounted Bike Rack

Model: KR-TUTRBK ( 3 Bike Capacity )

■

Thank you for purchasing Overdrive trunk bike rack, please confirm that all parts are included

in the package.

■

If there is anything missing or defective, please contact us at CustomerService@OverdriveBrands.com

1-1

■

1-1 Install the bike carrier on the trunk with hubs opened. The arm should be 10° to 30° degrees up.

■

1-2 Turn the hub lever clockwise until the hub interlocks.

■

Install six hooks on a structurally sound trunk lid and tighten all six straps both before and after mounting

bikes on the rack.

10°~30°

Protective foam pads x 4

Rubber strap x 6

Safety strap x 1

Clean trunk/hatch and rear of car

before installation.

1-2

Table of Contents

Need help?

Do you have a question about the KR-TUTRBK and is the answer not in the manual?

Page 1 Clean trunk/hatch and rear of car before installation. Safety strap x 1 ■ Thank you for purchasing Overdrive trunk bike rack, please confirm that all parts are included in the package. ■ If there is anything missing or defective, please contact us at CustomerService@OverdriveBrands.com 10°~30°...
Page 2 Pass the safety strap through the buckle and pull firmly to properly secure the bicycles. Thank you for your purchase. At Overdrive, we stand by the quality and design of our Bike Rack products. Our Limited Lifetime Warranty covers a wide variety of mishaps and performance guarantees. If you have further questions about our Limited Lifetime Warranty or need any support, you can start a conversation with us at CustomerService@OverdriveBrands.com...