Page 2
Once the barrier fluid and system have reached the end of its life, it should be disposed of in accordance with local regulations and with due regard to the environment. AESSEAL (MCK) Ltd. 139A Hillsborough Old Road, Lisburn, N.Ireland, BT27 5QE Tel:...
Page 3
H Weld Pad T Cooling Coil Vessel Label U Cooling Coil Inlet J Pipe Clamp V Cooling Coil Outlet K Instrumentation Port X Finned Tubing L Vessel Fill AESSEAL (MCK) Ltd. 139A Hillsborough Old Road, Lisburn, N.Ireland, BT27 5QE Tel: Email:...
Page 4
10 bar/ 145 psi. Screw the cap on the relief valve (E) fully clockwise. Pull up the cap on the pressure regulator and turn it fully anticlockwise. AESSEAL (MCK) Ltd. 139A Hillsborough Old Road, Lisburn, N.Ireland, BT27 5QE Tel: Email:...
Page 5
Press the cap down to lock it so that the pressure cannot be altered. Ensure that the gas supply to the vessel remains on after commissioning is complete. AESSEAL (MCK) Ltd. 139A Hillsborough Old Road, Lisburn, N.Ireland, BT27 5QE Tel: Email:...
Page 6
The hot pipe must flow to the return port (M) on the vessel or flow may cease. If the flow is incorrect, reverse the connections at the seal or vessel. AESSEAL (MCK) Ltd. 139A Hillsborough Old Road, Lisburn, N.Ireland, BT27 5QE Tel: Email:...
Page 7
ASME VIII Div.1 SSE10: 10 litres / 2.64 gal (US) Complies with Pressure Equipment Directive. SSE12: 12 litres / 3.00 gal (US) SSE25: 25 litres / 6.60 gal (US) AESSEAL (MCK) Ltd. 139A Hillsborough Old Road, Lisburn, N.Ireland, BT27 5QE Tel: Email:...
Page 8
AESSEAL recommends this should form part of the written scheme of examination as per the UK PSSR 2000 regulations. * AESSEAL offers a full examination, integrity testing and refurbishment service (or, where necessary, a replacement system / vessel), to ensure continued optimum and safe system performance.
Need help?
Do you have a question about the EasyClean SP Series and is the answer not in the manual?
Questions and answers