Westinghouse LTV-32w4 User Manual page 14

4. Connect power cables
Connect the power cord to the LCD TV DVD combo then to a properly grounded AC
outlet.
I
MPORTANT: The power input voltage is 120VAC, 60 Hz, 3A, Before beginning,
make sure all devices are turned off.
5. Turn Power On
Press the Power button on the right side of the LCD TV DVD combo, or press the
Power (Red) button on the remote control.
6. Select input source for the LCD TV DVD combo using the OSD menu
or remote control
7. If connecting to Antenna, Cable or other RF source on TV Inputs:
See page 19 to auto scan and edit available channels.
If connecting to a PC (VGA):
8.
For the best picture quality, set the timing mode of you computer to 1360 x 768 at 60Hz.
Refer to the graphic card's user guide of your computer to set this timing mode.
13